How To Fix a Rough-Sounding Grinding Machine – Basically, the grinding machine has a slightly loud sound. However, if the sound is loud and rough, it is possible that the hand grinding machine is experiencing problems.
The harsh sound of the hand grinding machine is a common problem in grinding machines. Especially if the grinding machine is used continuously to grinding hard objects. Then this problem will quickly arise.
This rough-sounding hand grinding machine is actually included in a light and easy-to-repair problem. However, we must find the cause of the problem to be able to fix it. For that, the following will be presented some causes of hand grinding machines that read roughly and how to fix them.
Causes And How To Fix a Rough-Sounding Grinding Machine
1. Gear Damage
The hand grinding machine generally has a pair of connecting gears. One gear adheres to the rotor and the other is mounted on the shaft of the grinding eye. One cause that resulted in harsh noise in the hand grinding machine is a pair of gear is worn. While the worn gears are due to the fiber that has expired. Thus, there is no friction lubricant on the pair of gears when moving.
The way to solve this problem is by displacing gears that are in the rotor by using the ring when the wear of the gear is not so severe. But if it is severe, then you should change the pair of gears with a new one.
2. Bearing Damage
The second cause of a rough-sounding hand grinding machine is that the bearing is broken. Damage to the bearing is usually caused by a less good bearing quality. So that if the hand grinding machine is used for a long period, the bearing will be easily damaged.
Broken bearings will not be able to be repaired. Therefore, if you find that the grinding machine bearing has been damaged, you should replace it with a new bearing that corresponds to the bearing number.
3. There is Dirt Inside The Machine
Another cause of harsh noise in the hand grinding machine is the presence of dirt that enters the grinding machine. The dirt usually stems from the remnants of the workpiece that enters the machine and concerns the rotation of the hand grinding machine. It generates loud and rough sounds when the grinding machine is turned on.
To solve this problem, we have to do the grinding machine’s demolition. Then, clean the remnants of the dirt with the compressor wind until it exits all. Once clean, install all the parts that have been disassembled correctly.
These are some of the causes and how to fix a rough-sounding hand grinding machines. Hopefully useful articles.
More Articles :