How To Replace The Damaged Grinder Switch – the switch on the grinding machine serves as a breaker tool and an electric current connector that flows on the grinding machine. Therefore, grinding machines can be discontinued at any time even if the power cord is still connected to the mains.
In general, there are two types of switches used on the grinding machine, the switch that is behind the engine and the switch is located above or beside the body of the machine. But basically the switch used has the same shape only the different placement.
In some cases its use, sometimes the grinding machine that we have had problems. And one of these problems is the switch machine grinders do not work. So that the machine can not be turned on or can not stop and spin continuously.
If you encounter such a problem, we need to replace the switch so that the grinding machine can function normally. And here is how to change the switch on the grinding machine.
How To Replace The Damaged Grinder Switch
How to Replace The Grinder Switch Located Behind The Machine
- Open the lid of the back grinding machine by releasing the bolt in advance
- After that, remove the lock nut that switches attached to the switch button
- Then take the sacches and remove the 2 cable locking bolts attached to the switch
- Once the cable is detached, reconnect it to the new switch and lock it with its locking bolt
- Then install the new switch in place and lock it with its locking nut
- Replace the back cover of the machine and lock it with the locking bolt. Finished
How to Replace The Grinder Switch Located On The Machine
- Open the lid of the back grinding machine by releasing the bolt in advance
- Then remove the cables attached to the switch. For the switch located above/next to the body of the machine, usually the cable attached to the switch is a hook. And to remove it, we simply unplug the cable hook. But there is also a locking bolt and we have to remove the locking bolt to remove the cord
- Once the cord is detached, take the switch by opening its handles and pushing the switch out
- Then plug the new switch by pressing the switch in place until the grip holder closes and locks the switch
- After that, re-associate the disconnected cable on the new switch
- Replace the back cover of the machine and lock it with the locking bolt. Finished
Thus the discussion on how to replace damaged grinder switch. Hopefully this article can be helpful and helpful.
More Articles :
- How To Fix The Dead Grinding Machine
- How To Replacement Carbon Brush Grinding Machine
- Hand Grinding Machine Components And Functions
- How To Use Hand Grinding Machine
- Type And Size Carbon Brush Of Grinder
